Files changed

• .milkyflow/agents/devops/answers/EPIC_1_US_3/
• milkyflow/agents/history.md

Briefing

You are the DevOps Agent.

Based on the rules you must follow in the file .milkyflow/agents/devops/rules_devops_agent.md,
deploy the application for the QA session of US_3 of EPIC_1.

Deployment configuration (authored by the Solution Architect):
.milkyflow/agents/devops/prompts/EPIC_1_US_3/DEPLOY_CONFIG_1.md

1. Read it fully. Verify every variable in "Configuration and secrets" has a value available
   from its stated source — check presence only, never print values.
2. Launch the third-tier services, then the application, exactly as specified.
3. Execute every readiness check and capture the literal results.
4. Write the Deployment section of your answer file at
   .milkyflow/agents/devops/answers/EPIC_1_US_3/DEPLOY_CONFIG_1.md:
   set the mandatory `Lifecycle: DEPLOYED` marker on the line under the title, then record
   actions performed, readiness results, endpoints confirmed reachable, deviations (none, or
   justified), and the explicit status READY or FAILED. Do NOT write a Teardown section or
   the `TORN_DOWN` marker now — those belong to the teardown phase only.

If the deployment fails, classify and route per section 5 of your rules: application defect
→ bug report at .milkyflow/agents/devops/reports/EPIC_1_DEPLOY_BUG_$n.md; configuration
defect → "Configuration corrections needed" in your answer, for the Solution Architect;
missing secret or unreachable infrastructure → create or update
.milkyflow/agents/devops/reports/EPIC_1_US_3_DEPLOY_BLOCKED.md and stop.
All your reports go under .milkyflow/agents/devops/reports/ — NEVER under .milkyflow/agents/qa/.
Never force a workaround.

QA starts only if your answer file reports READY.

Output

● Read DEPLOY_CONFIG_1.md
  │ .milkyflow/agents/devops/prompts/EPIC_1_US_3/DEPLOY_CONFIG_1.md
  └ 125 lines read

● Read rules_devops_agent.md
  │ .milkyflow/agents/devops/rules_devops_agent.md
  └ 381 lines read

Now let me check the secrets, directories, and infrastructure availability:

● Check secrets directory (shell)
  │ ls local/.secrets/ 2>/dev/null && echo "secrets dir exists" || echo "no secrets dir"
  └ 4 lines…

● Check env and local dir (shell)
  │ cat .env.example 2>/dev/null || echo "no .env.example"; ls local/ 2>/dev/null || echo "no local
  │ dir"
  └ 11 lines…

✗ Check mysqldump (shell)
  │ which mysqldump && echo "found" || echo "not in PATH"; ls -l /usr/bin/mysqldump
  │ /usr/local/bin/mysqldump 2>/dev/null || echo "not found at standard paths"
  └ Permission denied and could not request permission from user

✗ Find mysqldump binary (shell)
  │ which mysqldump || true; command -v mysqldump || true; find /usr /opt /home -name mysqldump
  │ -type f 2>/dev/null | head -5 || true
  └ Permission denied and could not request permission from user

● List secrets files (shell)
  │ ls local/.secrets/
  └ 3 lines…

● Check QA secret file (shell)
  │ ls local/.secrets/QA_SOURCE_DB_PASSWORD && echo "present" || echo "missing"
  └ 3 lines…

✗ Check mysqldump existence (shell)
  │ ls -l /usr/bin/mysqldump 2>/dev/null; ls -l /usr/local/bin/mysqldump 2>/dev/null; ls -l
  │ /bin/mysqldump 2>/dev/null; echo "search done"
  └ Permission denied and could not request permission from user

✗ Check mysqldump at /usr/bin (shell)
  │ ls -l /usr/bin/mysqldump 2>&1; echo "exit: $?"
  └ Permission denied and could not request permission from user

● Check mysqldump in PATH (shell)
  │ command -v mysqldump 2>&1; echo "exit=$?"
  └ 3 lines…

Good, `mysqldump` is present. Now let me check for PM authorization for secret generation and proceed with the deployment:

● Check PM authorization for secret generation (shell)
  │ find
  │ /home/oem/Documents/Sandbox/Kody/Projects/Backupper/.milkyflow/agents/project_manager/reports
  │ -name "*.md" 2>/dev/null | xargs grep -l "Authorized" 2>/dev/null | head -5
  └ 2 lines…

● Run uv sync (shell)
  │ uv sync --dev 2>&1 | tail -5
  └ 3 lines…

● Check PM authorization text (shell)
  │ grep -A5 "Resolution" /home/oem/Documents/Sandbox/Kody/Projects/Backupper/.milkyflow/agents/proj
  │ ect_manager/reports/EPIC_1_BUG_1_BLOCKER_1.md | grep -i "authorized"
  └ 1 line…

● Run alembic migrations (shell)
  │ .venv/bin/alembic upgrade head 2>&1
  └ 5 lines…

● Read PM resolution section (shell)
  │ grep -A10 "## Resolution" /home/oem/Documents/Sandbox/Kody/Projects/Backupper/.milkyflow/agents/
  │ project_manager/reports/EPIC_1_BUG_1_BLOCKER_1.md
  └ 11 lines…

PM authorized generation of `QA_SOURCE_DB_PASSWORD`. Since the file already exists in `local/.secrets/`, I just need to use it. Now let me proceed with the rest of the deployment:

● Create required directories (shell)
  │ mkdir -p local/captures && mkdir -p /tmp/qa-upload-test && echo "dirs created"
  └ 2 lines…

● Register QA fixture source (shell)
  │ PATH=".venv/bin:$PATH" backup-cockpit raw-capture source register qa-test-source-1 \
  │ --display-name "QA Test Source 1" \
  │ --db-host 127.0.0.1 --db-port 3306 --db-name testdb \
  │ --db-credential-key raw-capture:qa-test-source-1 \
  │ --upload-volume-path /tmp/qa-upload-test \…
  └ 9 lines…

The CLI interface differs from the configuration spec. The config uses positional `SOURCE_ID` with `--db-credential-key` and `--upload-volume-path`, but the actual CLI requires `--source-id`, `--db-user`, and `--upload-path`. This is a **configuration defect**.

Let me verify more closely:

● Check register command help (shell)
  │ PATH=".venv/bin:$PATH" backup-cockpit raw-capture source register --help
  └ 19 lines…

The DEPLOY_CONFIG uses flags that don't match the actual CLI:
- Config: positional `qa-test-source-1`, `--db-credential-key`, `--upload-volume-path`
- Actual: `--source-id`, `--db-user`, `--upload-path` (no `--db-credential-key`)

Also, no `--db-user` value is provided in the config. This is a configuration defect. Let me also run the readiness checks that don't depend on source registration to capture their outputs:

● Readiness check 2a (shell)
  │ PATH=".venv/bin:$PATH" backup-cockpit raw-capture run --help 2>&1; echo "exit=$?"
  └ 9 lines…

● Readiness check 2b (shell)
  │ PATH=".venv/bin:$PATH" backup-cockpit raw-capture artifact validate --help 2>&1; echo "exit=$?"
  └ 10 lines…

● Readiness check 1 - alembic current (shell)
  │ PATH=".venv/bin:$PATH" .venv/bin/alembic current 2>&1
  └ 4 lines…

● Readiness check 4 (shell)
  │ ls -la /home/oem/Documents/Sandbox/Kody/Projects/Backupper/local/captures/ 2>&1; echo "exit=$?"
  └ 5 lines…

● Readiness check 3 (shell)
  │ PATH=".venv/bin:$PATH" backup-cockpit raw-capture readiness check qa-test-source-1 2>&1; echo
  │ "exit=$?"
  └ 3 lines…

I have all information needed. Readiness check 3 failed because the source registration failed (blocked by the config defect). Now let me create the answer file and history entry:

● Create answer directory (shell)
  │ mkdir -p
  │ /home/oem/Documents/Sandbox/Kody/Projects/Backupper/.milkyflow/agents/devops/answers/EPIC_1_US_3
  └ 1 line…

● Create DEPLOY_CONFIG_1.md +137
  └ .milkyflow/agents/devops/answers/EPIC_1_US_3/DEPLOY_CONFIG_1.md

Now append the history entry:

● Append history row (shell)
  │ HIST=/home/oem/Documents/Sandbox/Kody/Projects/Backupper/.milkyflow/agents/history.md
  │ if [ ! -f "$HIST" ]; then
  │ echo "| Timestamp | Agent | Scenario | Details |" > "$HIST"
  │ echo "|---|---|---|---|" >> "$HIST"
  │ fi…
  └ 5 lines…

---

**Deployment: FAILED — Configuration defect**

The deployment got through migrations (both applied, `6922ba2e69b1 head`), CLI checks, and directory setup, but failed at QA fixture source registration. The `backup-cockpit raw-capture source register` command in DEPLOY_CONFIG_1 uses flags that don't exist on the actual CLI.

**Configuration corrections needed (for the Solution Architect):**

| Problem | Config says | Actual CLI requires |
|---|---|---|
| Source ID | positional arg | `--source-id SOURCE_ID` |
| Upload path flag | `--upload-volume-path` | `--upload-path` |
| Credential key flag | `--db-credential-key` | **doesn't exist** |
| DB user | not listed | `--db-user USER` (required) |

The `db-user` for the QA fixture source is also missing entirely from the "Configuration and secrets" table.

Answer file written at `.milkyflow/agents/devops/answers/EPIC_1_US_3/DEPLOY_CONFIG_1.md` with `Lifecycle: DEPLOYED` and `Status: FAILED`. QA does **not** start until the config is corrected and deployment is retried.



Changes    +137 -0
AI Credits 31.5 (2m 20s)
Tokens     ↑ 505.7k (481.7k cached, 21.4k written) • ↓ 5.5k (62 reasoning)
Resume     copilot --resume=3ee09b35-ec0f-4782-bba1-eb407e9815b8