Files changed

• .milkyflow/agents/devops/answers/EPIC_1_US_4/
• milkyflow/agents/history.md

Briefing

You are the DevOps Agent.

Based on the rules you must follow in the file .milkyflow/agents/devops/rules_devops_agent.md,
deploy the application for the QA session of US_4 of EPIC_1.

Deployment configuration (authored by the Solution Architect):
.milkyflow/agents/devops/prompts/EPIC_1_US_4/DEPLOY_CONFIG_1.md

1. Read it fully. Verify every variable in "Configuration and secrets" has a value available
   from its stated source — check presence only, never print values.
2. Launch the third-tier services, then the application, exactly as specified.
3. Execute every readiness check and capture the literal results.
4. Write the Deployment section of your answer file at
   .milkyflow/agents/devops/answers/EPIC_1_US_4/DEPLOY_CONFIG_1.md:
   set the mandatory `Lifecycle: DEPLOYED` marker on the line under the title, then record
   actions performed, readiness results, endpoints confirmed reachable, deviations (none, or
   justified), and the explicit status READY or FAILED. Do NOT write a Teardown section or
   the `TORN_DOWN` marker now — those belong to the teardown phase only.

If the deployment fails, classify and route per section 5 of your rules: application defect
→ bug report at .milkyflow/agents/devops/reports/EPIC_1_DEPLOY_BUG_$n.md; configuration
defect → "Configuration corrections needed" in your answer, for the Solution Architect;
missing secret or unreachable infrastructure → create or update
.milkyflow/agents/devops/reports/EPIC_1_US_4_DEPLOY_BLOCKED.md and stop.
All your reports go under .milkyflow/agents/devops/reports/ — NEVER under .milkyflow/agents/qa/.
Never force a workaround.

QA starts only if your answer file reports READY.

Output

● Read DEPLOY_CONFIG_1.md
  │ .milkyflow/agents/devops/prompts/EPIC_1_US_4/DEPLOY_CONFIG_1.md
  └ 173 lines read

● Read rules_devops_agent.md
  │ .milkyflow/agents/devops/rules_devops_agent.md
  └ 381 lines read

Now let me check the pre-flight gates and environment:

● Check mysqldump presence (shell)
  │ which mysqldump 2>/dev/null && echo "FOUND" || echo "NOT FOUND"
  └ 3 lines…

● Check QA_SOURCE_DB_PASSWORD secret (shell)
  │ ls local/.secrets/QA_SOURCE_DB_PASSWORD 2>/dev/null && echo "EXISTS" || echo "MISSING"
  └ 3 lines…

Pre-flight gates passed. Now proceed with deployment:

● Sync Python environment (shell)
  │ uv sync --dev 2>&1 | tail -5
  └ 3 lines…

● Apply migrations (shell)
  │ PATH=".venv/bin:$PATH" .venv/bin/alembic upgrade head 2>&1
  └ 3 lines…

● Check alembic current revision (shell)
  │ PATH=".venv/bin:$PATH" .venv/bin/alembic current 2>&1
  └ 4 lines…

All three migrations applied. Now create directories and register sources:

● Create required directories (shell)
  │ mkdir -p local/captures && mkdir -p /tmp/qa-upload-test && echo "dirs OK"
  └ 2 lines…

● Check existing sources (shell)
  │ PATH=".venv/bin:$PATH" backup-cockpit raw-capture source list 2>&1
  └ 2 lines…

● Register qa-test-source-1 (shell)
  │ cat local/.secrets/QA_SOURCE_DB_PASSWORD | PATH=".venv/bin:$PATH" backup-cockpit raw-capture
  │ source register \
  │ --source-id qa-test-source-1 \
  │ --display-name "QA Test Source 1" \
  │ --db-host 127.0.0.1 --db-port 3306 \…
  └ 8 lines…

● Register qa-test-source-2 (shell)
  │ cat local/.secrets/QA_SOURCE_DB_PASSWORD | PATH=".venv/bin:$PATH" backup-cockpit raw-capture
  │ source register \
  │ --source-id qa-test-source-2 \
  │ --display-name "QA Test Source 2" \
  │ --db-host 127.0.0.1 --db-port 3306 \…
  └ 8 lines…

● Mark qa-test-source-1 as critical (shell)
  │ PATH=".venv/bin:$PATH" backup-cockpit raw-capture source update \
  │ --source-id qa-test-source-1 --critical 2>&1
  └ 3 lines…

● Check source update help (shell)
  │ PATH=".venv/bin:$PATH" backup-cockpit raw-capture source update --help 2>&1
  └ 25 lines…

The DEPLOY_CONFIG specifies `--source-id qa-test-source-1 --critical` but the CLI uses `SOURCE_ID` as a positional argument. Let me try with the correct syntax to verify the command actually works:

● Mark source-1 critical with positional arg (shell)
  │ PATH=".venv/bin:$PATH" backup-cockpit raw-capture source update qa-test-source-1 --critical 2>&1
  └ 2 lines…

That works. The DEPLOY_CONFIG has a minor typo (`--source-id` instead of positional `SOURCE_ID`), but the correct invocation succeeds. This is a configuration defect I must record. Now run readiness checks:

● Readiness check 2: CLI source subcommand (shell)
  │ PATH=".venv/bin:$PATH" backup-cockpit raw-capture source --help 2>&1
  └ 13 lines…

● Readiness check 1: migrations (shell)
  │ PATH=".venv/bin:$PATH" .venv/bin/alembic current 2>&1
  └ 4 lines…

● Readiness check 4: source status command (shell)
  │ PATH=".venv/bin:$PATH" backup-cockpit raw-capture source status 2>&1
  └ 5 lines…

● Readiness check 3: both sources listed (shell)
  │ PATH=".venv/bin:$PATH" backup-cockpit raw-capture source list 2>&1
  └ 5 lines…

● Readiness check 6: artifact directory (shell)
  │ ls -la /home/oem/Documents/Sandbox/Kody/Projects/Backupper/local/captures/ 2>&1
  └ 4 lines…

● Readiness check 5: source-1 readiness (shell)
  │ PATH=".venv/bin:$PATH" backup-cockpit raw-capture readiness check qa-test-source-1 2>&1
  └ 11 lines…

All readiness checks passed. Now ensure the answer directory exists and write the answer file:

● Create answer directory (shell)
  │ mkdir -p
  │ /home/oem/Documents/Sandbox/Kody/Projects/Backupper/.milkyflow/agents/devops/answers/EPIC_1_US_4
  └ 1 line…

● Create DEPLOY_CONFIG_1.md +186
  └ .milkyflow/agents/devops/answers/EPIC_1_US_4/DEPLOY_CONFIG_1.md

Now append the history row:

● Append history row (shell)
  │ HISTORY=/home/oem/Documents/Sandbox/Kody/Projects/Backupper/.milkyflow/agents/history.md
  │ if [ ! -f "$HISTORY" ]; then
  │ echo "| UTC Timestamp | Agent | Scenario | Details |" > "$HISTORY"
  │ echo "|---|---|---|---|" >> "$HISTORY"
  │ fi…
  └ 5 lines…

Deployment complete. Here's the summary:

---

**Status: READY**

All pre-flight gates passed:
- `local/.secrets/QA_SOURCE_DB_PASSWORD` — present ✓
- `mysqldump` at `/usr/bin/mysqldump` ✓

All deployment steps executed successfully:
- `uv sync --dev` ✓
- Migrations applied to head `a1b2c3d4e5f6` ✓
- `qa-test-source-1` registered and marked `[CRITICAL]` ✓
- `qa-test-source-2` registered ✓

All 6 readiness checks passed (migrations at head, CLI subcommands present, both sources listed with correct CRITICAL flags, source status shows `LAST_RUN_STATUS` column, source-1 readiness → READY, artifact dir writable).

**One configuration defect noted** for the Solution Architect: DEPLOY_CONFIG step 6 uses `--source-id qa-test-source-1` but the CLI requires `SOURCE_ID` as a positional argument. The correct form was executed. Correction documented in the answer file under "Configuration corrections needed."

Answer file written: `.milkyflow/agents/devops/answers/EPIC_1_US_4/DEPLOY_CONFIG_1.md` (`Lifecycle: DEPLOYED`, Status: READY).



Changes    +186 -0
AI Credits 37.3 (2m 6s)
Tokens     ↑ 519.8k (481.6k cached, 34.5k written) • ↓ 5.9k (167 reasoning)
Resume     copilot --resume=f47a6b44-36eb-409f-9e4c-03d6f3ef8142