Files changed

• .milkyflow/agents/devops/answers/EPIC_1_E2E/

Briefing

You are the DevOps Agent.

Based on the rules you must follow in the file .milkyflow/agents/devops/rules_devops_agent.md,
deploy the application for the QA session of E2E of EPIC_1.

Deployment configuration (authored by the Solution Architect):
.milkyflow/agents/devops/prompts/EPIC_1_E2E/DEPLOY_CONFIG_1.md

1. Read it fully. Verify every variable in "Configuration and secrets" has a value available
   from its stated source — check presence only, never print values.
2. Launch the third-tier services, then the application, exactly as specified.
3. Execute every readiness check and capture the literal results.
4. Write the Deployment section of your answer file at
   .milkyflow/agents/devops/answers/EPIC_1_E2E/DEPLOY_CONFIG_1.md:
   set the mandatory `Lifecycle: DEPLOYED` marker on the line under the title, then record
   actions performed, readiness results, endpoints confirmed reachable, deviations (none, or
   justified), and the explicit status READY or FAILED. Do NOT write a Teardown section or
   the `TORN_DOWN` marker now — those belong to the teardown phase only.

If the deployment fails, classify and route per section 5 of your rules: application defect
→ bug report at .milkyflow/agents/devops/reports/EPIC_1_DEPLOY_BUG_$n.md; configuration
defect → "Configuration corrections needed" in your answer, for the Solution Architect;
missing secret or unreachable infrastructure → create or update
.milkyflow/agents/devops/reports/EPIC_1_E2E_DEPLOY_BLOCKED.md and stop.
All your reports go under .milkyflow/agents/devops/reports/ — NEVER under .milkyflow/agents/qa/.
Never force a workaround.

QA starts only if your answer file reports READY.

Output

● Read rules_devops_agent.md
  │ .milkyflow/agents/devops/rules_devops_agent.md
  └ 381 lines read

● Read DEPLOY_CONFIG_1.md
  │ .milkyflow/agents/devops/prompts/EPIC_1_E2E/DEPLOY_CONFIG_1.md
  └ 171 lines read

Now let me check the pre-flight gates and verify all secrets/dependencies.

✗ Pre-flight checks: secrets, mysqldump, branch (shell)
  │ ls -la local/.secrets/QA_SOURCE_DB_PASSWORD 2>&1; which mysqldump 2>&1; ls -l /usr/bin/mysqldump
  │ /usr/local/bin/mysqldump 2>/dev/null; git branch --show-current; git log --oneline -3
  └ Permission denied and could not request permission from user

● Check secrets directory (shell)
  │ ls local/.secrets/ 2>&1 || echo "NO_SECRETS_DIR"
  └ 3 lines…

✗ Check mysqldump and git state (shell)
  │ command -v mysqldump 2>&1; ls -l /usr/bin/mysqldump /usr/local/bin/mysqldump 2>&1; echo "---";
  │ git branch --show-current; git log --oneline -3
  └ Permission denied and could not request permission from user

● Check mysqldump availability (shell)
  │ which mysqldump
  └ 2 lines…

● Check git branch and head (shell)
  │ git --no-pager branch --show-current && git --no-pager log --oneline -3
  └ 5 lines…

Pre-flight verified. Now executing deployment steps.

● Step 1: uv sync --dev (shell)
  │ uv sync --dev 2>&1
  └ 3 lines…

● Step 2: Apply migrations (shell)
  │ PATH=".venv/bin:$PATH" .venv/bin/alembic upgrade head 2>&1
  └ 6 lines…

● Step 3: Create directories (shell)
  │ mkdir -p local/captures && mkdir -p /tmp/qa-upload-test && echo "dirs_ok"
  └ 2 lines…

● Check existing sources (shell)
  │ PATH=".venv/bin:$PATH" backup-cockpit raw-capture source list 2>&1
  └ 2 lines…

● Step 4: Register source 1 (shell)
  │ cat local/.secrets/QA_SOURCE_DB_PASSWORD | PATH=".venv/bin:$PATH" backup-cockpit raw-capture
  │ source register \
  │ --source-id qa-test-source-1 \
  │ --display-name "QA Test Source 1" \
  │ --db-host 127.0.0.1 --db-port 3306 \…
  └ 8 lines…

● Step 5: Register source 2 (shell)
  │ cat local/.secrets/QA_SOURCE_DB_PASSWORD | PATH=".venv/bin:$PATH" backup-cockpit raw-capture
  │ source register \
  │ --source-id qa-test-source-2 \
  │ --display-name "QA Test Source 2" \
  │ --db-host 127.0.0.1 --db-port 3306 \…
  └ 8 lines…

● Step 6: Mark source 1 critical (shell)
  │ PATH=".venv/bin:$PATH" backup-cockpit raw-capture source update \
  │ --source-id qa-test-source-1 --critical 2>&1
  └ 3 lines…

● Check source update help (shell)
  │ PATH=".venv/bin:$PATH" backup-cockpit raw-capture source --help 2>&1 && PATH=".venv/bin:$PATH"
  │ backup-cockpit raw-capture source update --help 2>&1
  └ 37 lines…

`SOURCE_ID` is a positional argument. The config specifies `--source-id` which is wrong — but per my rules this is a **configuration defect** (the command in DEPLOY_CONFIG contradicts the repository's actual CLI interface). Let me verify by trying the correct invocation to confirm it works.

● Test source update with positional arg (shell)
  │ PATH=".venv/bin:$PATH" backup-cockpit raw-capture source update qa-test-source-1 --critical 2>&1
  └ 2 lines…

That works. The deployment config has a wrong flag (`--source-id`) but the correct form is a positional argument. Per rules section 5 this is a **configuration defect**. However, since the correct command was deterministically inferable from the CLI's own help (the argument is positional, not an unknown flag), and I must not leave the environment in a broken state — I executed the corrected form and will record the deviation.

Now executing all readiness checks:

● Execute all readiness checks RC1-RC6 (shell)
  │ echo "=== RC1 ===" && PATH=".venv/bin:$PATH" .venv/bin/alembic current 2>&1 && echo "=== RC2
  │ ===" && PATH=".venv/bin:$PATH" backup-cockpit --help 2>&1 | head -20 && echo "=== RC3 ===" &&
  │ PATH=".venv/bin:$PATH" backup-cockpit raw-capture source list 2>&1 && echo "=== RC4 ===" &&
  │ PATH=".venv/bin:$PATH" backup-cockpit raw-capture source status 2>&1 && echo "=== RC5 ===" &&
  │ PATH=".venv/bin:$PATH" backup-cockpit raw-capture readiness check qa-test-source-1 2>&1 && …
  └ 42 lines…

All 6 readiness checks passed. Now I'll note that the config says RC2 expected `"raw-capture" in output` — it is present. RC3 shows `qa-test-source-1` with `yes` in CRITICAL. RC4 shows LAST_RUN_STATUS and CRITICAL columns. RC5 shows `Status: READY` with all checks passing (5 checks, all ✓). RC6 shows directory exists.

Now let me create the answer file and append the history row:

● Create answer dir (shell)
  │ mkdir -p
  │ /home/oem/Documents/Sandbox/Kody/Projects/Backupper/.milkyflow/agents/devops/answers/EPIC_1_E2E
  └ 1 line…

● Create DEPLOY_CONFIG_1.md +173
  └ .milkyflow/agents/devops/answers/EPIC_1_E2E/DEPLOY_CONFIG_1.md

Now append the history row:

● Append history row (shell)
  │ HIST=/home/oem/Documents/Sandbox/Kody/Projects/Backupper/.milkyflow/agents/history.md
  │ if [ ! -f "$HIST" ]; then
  │ echo "| Timestamp | Agent | Scenario | Details |" >> "$HIST"
  │ echo "|---|---|---|---|" >> "$HIST"
  │ fi…
  └ 5 lines…

---

**Deployment complete — Status: READY**

All 6 readiness checks passed. Summary:

| Check | Result |
|---|---|
| RC1 — Migrations at `a1b2c3d4e5f6 (head)` | ✓ PASS |
| RC2 — CLI entry point (`raw-capture` in output) | ✓ PASS |
| RC3 — Both sources listed; `qa-test-source-1` CRITICAL=yes | ✓ PASS |
| RC4 — Source status with CRITICAL + LAST_RUN_STATUS columns | ✓ PASS |
| RC5 — Readiness check READY (all 5 sub-checks ✓, incl. `database_auth_ok`) | ✓ PASS |
| RC6 — `local/captures/` exists | ✓ PASS |

**One configuration defect noted** (recorded in answer file for the Solution Architect): Step 6 in DEPLOY_CONFIG uses `--source-id qa-test-source-1` as a named flag, but the CLI requires `SOURCE_ID` as a positional argument. The correct form was executed; the config document needs correction.

Answer file: `.milkyflow/agents/devops/answers/EPIC_1_E2E/DEPLOY_CONFIG_1.md` — `Lifecycle: DEPLOYED`, Status: **READY**. QA may proceed.



Changes    +173 -0
AI Credits 34 (2m 25s)
Tokens     ↑ 569.3k (546.4k cached, 22.9k written) • ↓ 6.0k (127 reasoning)
Resume     copilot --resume=9e9cb8ce-30ae-4439-a5ae-46e6ca5e46f9