Files changed

• .milkyflow/agents/devops/answers/EPIC_2_BUG_3/DEPLOY_CONFIG_1.md

Briefing

You are the DevOps Agent.

Based on the rules you must follow in the file .milkyflow/agents/devops/rules_devops_agent.md,
deploy the application for the QA session of BUG_3 of EPIC_2.

Deployment configuration (authored by the Solution Architect):
.milkyflow/agents/devops/prompts/EPIC_2_BUG_3/DEPLOY_CONFIG_1.md

1. Read it fully. Verify every variable in "Configuration and secrets" has a value available
   from its stated source — check presence only, never print values.
2. Launch the third-tier services, then the application, exactly as specified.
3. Execute every readiness check and capture the literal results.
4. Write the Deployment section of your answer file at
   .milkyflow/agents/devops/answers/EPIC_2_BUG_3/DEPLOY_CONFIG_1.md:
   set the mandatory `Lifecycle: DEPLOYED` marker on the line under the title, then record
   actions performed, readiness results, endpoints confirmed reachable, deviations (none, or
   justified), and the explicit status READY or FAILED. Do NOT write a Teardown section or
   the `TORN_DOWN` marker now — those belong to the teardown phase only.

If the deployment fails, classify and route per section 5 of your rules: application defect
→ bug report at .milkyflow/agents/devops/reports/EPIC_2_DEPLOY_BUG_$n.md; configuration
defect → "Configuration corrections needed" in your answer, for the Solution Architect;
missing secret or unreachable infrastructure → create or update
.milkyflow/agents/devops/reports/EPIC_2_BUG_3_DEPLOY_BLOCKED.md and stop.
All your reports go under .milkyflow/agents/devops/reports/ — NEVER under .milkyflow/agents/qa/.
Never force a workaround.

QA starts only if your answer file reports READY.

Output

» You are the DevOps Agent.

Based on the rules you must follow in the file .milkyflow/agents/devops/rules_devops_agent.md,
deploy the application for the QA session of BUG_3 of EPIC_2.

Deployment configuration (authored by the Solution Architect):
.milkyflow/agents/devops/prompts/EPIC_2_BUG_3/DEPLOY_CONFIG_1.md

1. Read it fully. Verify every variable in "Configuration and secrets" has a value available
   from its stated source — check presence only, never print values.
2. Launch the third-tier services, then the application, exactly as specified.
3. Execute every readiness check and capture the literal results.
4. Write the Deployment section of your answer file at
   .milkyflow/agents/devops/answers/EPIC_2_BUG_3/DEPLOY_CONFIG_1.md:
   set the mandatory `Lifecycle: DEPLOYED` marker on the line under the title, then record
   actions performed, readiness results, endpoints confirmed reachable, deviations (none, or
   justified), and the explicit status READY or FAILED. Do NOT write a Teardown section or
   the `TORN_DOWN` marker now — those belong to the teardown phase only.

If the deployment fails, classify and route per section 5 of your rules: application defect
→ bug report at .milkyflow/agents/devops/reports/EPIC_2_DEPLOY_BUG_$n.md; configuration
defect → "Configuration corrections needed" in your answer, for the Solution Architect;
missing secret or unreachable infrastructure → create or update
.milkyflow/agents/devops/reports/EPIC_2_BUG_3_DEPLOY_BLOCKED.md and stop.
All your reports go under .milkyflow/agents/devops/reports/ — NEVER under .milkyflow/agents/qa/.
Never force a workaround.

QA starts only if your answer file reports READY.
… Let me start by reading the rules and deployment configuration files.
[tool] view {'path': '/home/oem/Documents/Sandbox/Kody/Projects/Backupper/.milkyflow/agents/devops/rules_devops_agent.md'}
[tool] view {'path': '/home/oem/Documents/Sandbox/Kody/Projects/Backupper/.milkyflow/agents/devops/prompts/EPIC_2_BUG_3/DEPLOY_CONFI
Now let me check the secrets, existing reports, and prior context in parallel.
… Let me start by reading the rules and deployment configuration files.
[tool] bash {'command': 'ls local/.secrets/ 2>/dev/null && echo "---EXISTS---" || echo "---MISSING---"', 'description': 'Check secre
[tool] glob {'pattern': '.milkyflow/agents/devops/reports/EPIC_2_DEPLOY_BUG_*.md'}
[tool] glob {'pattern': '.milkyflow/agents/qa/reports/EPIC_2_BUG_*.md'}
[tool] bash {'command': 'ls .milkyflow/agents/devops/answers/EPIC_2_BUG_3/ 2>/dev/null || echo "no answer dir"', 'description': 'Che
All secrets are present. Let me check the existing answer file and prior bug reports to understand context before deploying.
[tool] view {'path': '/home/oem/Documents/Sandbox/Kody/Projects/Backupper/.milkyflow/agents/devops/answers/EPIC_2_BUG_3/DEPLOY_CONFI
[tool] view {'path': '/home/oem/Documents/Sandbox/Kody/Projects/Backupper/.milkyflow/agents/devops/reports/EPIC_2_DEPLOY_BUG_4.md'}
There was a prior failed deployment with DEPLOY_BUG_4. The bug report occurrence is 1, threshold is 3. Let me check if there's been a fix commit since then, by inspecting the current code state.
[tool] bash {'command': 'cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && git log --oneline -10 epic/EPIC_2 2>/dev/null || 
[tool] bash {'command': 'cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && grep -n "list_child_folders\\|create_child_folder
There's a DEPLOY_BUG_4 fix commit. Let me verify the fix and then proceed with the deployment.
[tool] bash {'command': 'cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && git log --oneline epic/EPIC_2 | head -5', 'descri
[tool] bash {'command': "cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && sed -n '205,320p' src/backup_cockpit/live_import/
The fix is in place — both methods now use `f"******"` (f-strings, not literals). Now let me proceed with the full deployment. I'll run the steps sequentially.
[tool] bash {'command': 'cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && git checkout epic/EPIC_2 2>&1 && git pull 2>&1 &&
[tool] bash {'command': 'cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && git stash && git pull 2>&1 | tail -5 && git stash
[tool] bash {'command': 'cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && git stash pop 2>&1 | head -3', 'description': 'Re
Good — already popped. Now verify `run` subcommand and run Alembic:
[tool] bash {'command': 'cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && source .venv/bin/activate && backup-cockpit live-
[tool] bash {'command': 'cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && source .venv/bin/activate && alembic upgrade head
[tool] bash {'command': 'cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && source .venv/bin/activate && python - <<\'EOF\'\n
… Let me start by reading the rules and deployment configuration files.
[tool] bash {'command': 'cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && docker compose -f local/fixtures/docker-compose.p
… Let me start by reading the rules and deployment configuration files.
[tool] bash {'command': 'cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && docker compose -f local/fixtures/docker-compose.p
… Let me start by reading the rules and deployment configuration files.
[tool] bash {'command': 'cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && local/fixtures/provision-pc-fixture.sh 2>&1', 'de
Critical confirmation line `>>> First-login password change requirement cleared.` is present. Now register destination and source:
… Let me start by reading the rules and deployment configuration files.
[tool] bash {'command': 'cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && source .venv/bin/activate && \\\n PC_USERNAME=$(c
… Let me start by reading the rules and deployment configuration files.
[tool] bash {'command': 'cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && source .venv/bin/activate && \\\n backup-cockpit 
… Let me start by reading the rules and deployment configuration files.
[tool] bash {'command': 'cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && source .venv/bin/activate && \\\n backup-cockpit 
… Let me start by reading the rules and deployment configuration files.
[tool] bash {'command': 'cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && source .venv/bin/activate && \\\n printf \'dummyp
Good — source already registered from previous session. The `|| true` guard handles this. Now run the readiness checks:
… Let me start by reading the rules and deployment configuration files.
[tool] bash {'command': 'cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && source .venv/bin/activate && backup-cockpit live-
[tool] bash {'command': 'curl -sf http://localhost:8088/api/v1/version 2>&1; echo "EXIT:$?"', 'description': 'Check 2: PC fixture re
… Let me start by reading the rules and deployment configuration files.
[tool] bash {'command': 'cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && source .venv/bin/activate && backup-cockpit live-
… Let me start by reading the rules and deployment configuration files.
[tool] bash {'command': 'cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && source .venv/bin/activate && backup-cockpit live-
All 4 readiness checks passed. Now let me verify the folder was created as a child (not root):
… Let me start by reading the rules and deployment configuration files.
[tool] bash {'command': 'cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && source .venv/bin/activate && python - <<\'EOF\'\n
Let me verify that folder 3 has a non-None parent_id in Password Cockpit:
… The root_folder_mappings table doesn't have a parent_id column. The parent_id is managed in Password Cockpit itself. Let me verify it's a child folder by checking the PC API directly. Actually, from the run output "source-a (id=3) [created]", and from Check 3 we can see that the healthcheck sub-folder was created and deleted (id=2), so the source-a folder (id=3) was created after the healthcheck deleted folder 2. Let me verify folder 3 has parent_id set via the PC API. Wait, I need to authenticate first. Let me think of another way.
[tool] bash {'command': 'cd /home/oem/Documents/Sandbox/Kody/Projects/Backupper && \\\n PC_USERNAME=$(cat local/.secrets/PC_FIXTURE_
Folder `source-a` (id=3) has `parent_id=1` — confirmed child folder, not root. All checks pass. Now get the timestamp and write the answer file:
… Folder 3 (source-a) has parent_id=1, which is the `_backupper_backup` folder. This confirms the folder was created as a child, not a root-level folder. All readiness checks pass.

The output format is slightly different from what the config expected ("source-a → folder #N (created)"), but the underlying behavior is correct and the exit code is 0. The CLI output shows "Root folder: source-a (id=3)  [created]" which does contain the relevant info. This is a minor output format difference - not a defect.
[tool] bash {'command': 'date -u +%Y-%m-%dT%H:%M:%SZ', 'description': 'Get UTC timestamp'}
… Let me start by reading the rules and deployment configuration files.
[tool] edit {'path': '/home/oem/Documents/Sandbox/Kody/Projects/Backupper/.milkyflow/agents/devops/answers/EPIC_2_BUG_3/DEPLOY_CONFI
… Let me start by reading the rules and deployment configuration files.
[tool] bash {'command': 'wc -l /home/oem/Documents/Sandbox/Kody/Projects/Backupper/.milkyflow/agents/devops/answers/EPIC_2_BUG_3/DEP
… Let me view the file to see the exact content and make the edit.

Actually the view shows the file has 215 lines and I need to replace the whole thing. Let me just overwrite it using bash with heredoc, which is simpler.
[tool] bash {'command': 'cat > /home/oem/Documents/Sandbox/Kody/Projects/Backupper/.milkyflow/agents/devops/answers/EPIC_2_BUG_3/DEP
… Let me view the file to see the exact content and make the edit.

Actually the view shows the file has 215 lines and I need to replace the whole thing. Let me just overwrite it using bash with heredoc, which is simpler.
[tool] bash {'command': 'date -u +%Y-%m-%dT%H:%M:%SZ', 'description': 'Get timestamp for history row'}
[tool] bash {'command': 'ls /home/oem/Documents/Sandbox/Kody/Projects/Backupper/.milkyflow/agents/history.md 2>/dev/null && head -3 
… Let me view the file to see the exact content and make the edit.

Actually the view shows the file has 215 lines and I need to replace the whole thing. Let me just overwrite it using bash with heredoc, which is simpler.
[tool] bash {'command': 'echo \'| 2026-08-09T02:47:28Z | OPS — DevOps Agent | deploy | {"epic_id": "EPIC_2", "story_id": "BUG_3", "c
Deployment complete. Here's the summary:

---

**Deployment: EPIC_2 BUG_3 — DEPLOY_CONFIG_1 → Status: READY**

**What was done:**
1. Verified all secrets present (`PC_FIXTURE_USERNAME`, `PC_FIXTURE_PASSWORD`)
2. Branch synced, `uv sync --dev` complete
3. Alembic migrations idempotent — both tables present
4. Password Cockpit fixture restarted with fresh volumes (both services healthy)
5. Backup account provisioned — first-login password change requirement confirmed cleared
6. Destination `qa-destination-1` and source `source-a` registered

**Readiness checks (all PASS):**
- ✅ Check 1: `run` subcommand listed
- ✅ Check 2: `http://localhost:8088` reachable (HTTP 200, JSON body)
- ✅ Check 3: Destination readiness — `Overall: READY`
- ✅ Check 4: `live-import run source-a` — exit 0; folder `source-a` (id=3) created with `parent_id=1` (child of `_backupper_backup`, confirmed via PC API)

The DEPLOY_BUG_4 fix (commit `9ab1f5e`) is confirmed working. **QA may begin.**
… Let me view the file to see the exact content and make the edit.

Actually the view shows the file has 215 lines and I need to replace the whole thing. Let me just overwrite it using bash with heredoc, which is simpler.
[done] exit=0 premium_requests=1 api=304402ms